There are two methods to get OKCrypto up and running:

From the tarball (i.e "on top of" an existing linux system)

  1. wget http://www.unsyncopated.com/corral/okcrypt_dist.tar.gz

  2. sha512sum --check <(echo '0c3b502eb528ca7840add038725f39fbc594369e850ed6e3f97f6b3c8b3f48fd401ac089fa7714d761259ddf71d9c986097aef27ada54fcfb89c9cc1a5ae79d5  prog/py/okcrypt/okcrypt_dist.tar.gz')

From the "live" thumb drive image

  1. dd if=

Crypto Phone/Stacked Linux-based CPhone Brainstorming/Scripted TX or RX WAV with Asterisk/Setup (last edited 2009-11-19 06:35:37 by Tyler)

All trademarks and copyrights on this page are owned by their respective owners.
Everything else copyright Tyler Oderkirk and Scott Carlson 2006-2010.
Tyler can be reached at "[FirstnameLastname]@gmail.com"